Lenovo W520 problems with Wifi and Windows 8
My Windows 8 based Lenovo W520 has an Intel Centrino Ultimate-N 6300 Wifi chipset, it has been giving me problems with this for a while.
The most usual problem is that if I sleep or hibernate the PC when I restart it, in a different location, there is a chance I cannot connect to Wifi networks. I can see them, get a limited connection but no IP address as DHCP fails. Sometimes using the hardware Wifi switch on the front left of the PC helps, sometimes switching into Windows 8 airplane mode and back out does, but not always. Often I need to restart the PC.
I have also had problems in Lync video calls, for example on Friday I was having all sorts of problems with a call, it was working for a few minutes then locking. When we swapped to a colleagues supposedly identical W520 all was OK.
So I think I have a problem. Time for some digging.
So I thought it was worth trying newer drivers, I had the default 15.1.x drivers provided by Windows update that are about 12 months old. I got the latest 15.6.x from Lenovo.
Also after reading around the subject I also set my Wifi adaptor to not controlled by power management (right click the network tools tray icon, open network sharing centre, change adaptor settings).
At first I thought this was helping, but I found if my PC screen locks due to inactivity I got a blue screen of death when I login again – with a watchdog timer error. So I switched the power save management back on and this seems to have fixed this problem.
So with the new drivers I now get a new set of behaviours.
- The PC seems to come out of sleep OK
- However, whilst streaming BBC IPlayer over the weekend to watch the triathlon (well done Non and Jonny) my Wifi link kept dropping and only getting a limited connection as it reconnected. This happened with two different systems, my Netgear N600 based BT ADSL and another on Virgin Cable with one of their Superhub (also Netgear based) at another house. Interestingly once I swapped from the 5Ghz to a 2.4GHz Wifi on my home N600 ADSL system I had no further problems with disconnects. Maybe a router problem here as opposed to the PC? But I did check there were no router firmware updates and no errors reported.
It then occurred to me to think what the different between my PC and my colleagues? I had a Hyper-V virtual switch configured to use Wifi. I tried deleting this, but it appears to have no effect on the 5Ghhz problem. So maybe a read herring.
So now I think my system is more stable, but only time will tell if it is working well enough. The biggest test will be the Lync based webinar I am doing on DevOps in a couple of weeks.
Read the complete post at http://blogs.blackmarble.co.uk/blogs/rfennell/post/2013/06/03/.aspx